FHT Full Height Turnstile

INTRODUCTION

The FHT full height revolving gate consists of a circular cage, a central shaft, a three speed 120 degree rotating gear lever, and a control drive box beam. It is a specialized product used to control and record personnel entering and exiting the control area. The product provides two-way access control, with a frequency of 10-20 people per minute that can be set. There are single channel and dual channel options available. This product is recommended for use at pedestrian entrances and exits in various high security areas to manage the flow, authorization, and recording of personnel entering and exiting.

FEATURES

Unique Design

Unique structural design with automatic recognition function; Equipped with reverse braking function; Equipped with automatic adaptation function; It has an automatic reset function.

Rich Control

Rich control functions and unified standard external electrical interfaces; Fire communication interface; Security alert interface; Automatic reset for power outage recovery.

Excellent anti-corrosion

Excellent anti-corrosion performance with 10 years of anti-corrosion quality assurance;

Base material hot-dip galvanized, with a zinc content of ≥ 120g/m2 (double-sided); 19 pre-treatment processes, super strong coating adhesion (level 0);

Aksu specialized outdoor powder coating to prevent coating peeling, powdering, and peeling.

COMPONENTS & PARAMETERS

Mesh

Item	Parameter
Width (mm)	1510
Height (mm)	2275
Opening direction	Bidirectional
Rotation angle	3*120°
Protection level	IP54
Turnover rate	20P/min
Working mode	Electromagnetic/Motor

The substrate is hot-dip galvanized with a zinc coating of 80-120g/m ², and the outer coating is sprayed with polyester electrostatic powder with a coating thickness of 100-120um. There are over 200 colors available in the RAL color series;

The entire component is hot-dip galvanized with a zinc coating of 550g/m ².